OMRON CS1W-PMV

Provides the functionality of isolators, power supplies, signal converters, and other devices. The Analog Input Unit converts analog input signals such as 1 to 5 V or 4 to 20 mA into digital values, and takes the values scaled in industrial units, and transfers it to the CPU Unit as the process value. Because of this, no ladder program is required at the CPU Unit for scaling. The Analog Output Unit converts analog output set values from the CPU Unit to analog output signals such as 4 to 20 mA…

Downloads

Datasheet

Request a Quote Back to Products

Features

Process Analog Input:

Up to eight analog inputs can be connected for each Unit.
There is isolation between input channels, so unwanted circuit paths between thermocouple inputs can be prevented. (Except for CS1W-PTR01/02)
Output scaling (±32,000)
Process value alarms (HH, H, L, LL)
Input disconnection alarm
Rate-of-change calculation and alarm
Top/bottom/valley hold (CS1W-PTS11/PTS12/PDC11 only) Process

Analog Output:

Up to four analog set values can be output for each Unit.
All outputs are isolated.
Output rate-of-change limit
Output high/low limits
Output scaling (±32,000)
Control output answer input (CS1W-PMV01 only)

Isolated-type Pulse Input:

Provides up to four pulses from a device such as a displacement flowmeter. The accumulated value can also be calculated at the same time and transferred to the CPU Unit at each cycle. (CS1W-PPS01)

OMRON CS1W-PMV

Downloads

Features

Related Products

OMRON CJ1G-CPU4[]P

OMRON CJ1M-CPU1[]

OMRON CJ1M-CPU1[]-ETN

OMRON CJ1M-CPU2[]

OMRON CJ1W-AD/DA/MAD

OMRON CJ1W-B7A

OMRON CJ1W-CLK

OMRON CJ1W-CRM21